Show Posts
1
General Discussion / A tool for balancing crushers, fans, mulchers, augers on combines, shafts, cent
« on: May 31, 2025, 01:42:24 PM »
Portable balancer & Vibration analyzer Balanset-1A
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Primary Functions and Features
Vibration Meter Mode
Tachometer: Accurate RPM measurement.
Phase: Determines the vibration signal's phase angle for accurate analysis.
1x Vibration: Measurement and analysis of the main frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Saves data for later analysis.
Balancing Function
Single-Plane Balancing: Balances rotors in one plane to minimize vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Shows imbalance on a polar chart for precise weight positioning.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Computes allowable imbalance as per ISO 1940 standards.
Grinding Wheel Balancing: Utilizes three counterweights to balance grinding wheels.
Graphs and Visualizations
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Represents vibration behavior at the main frequency.
Harmonic Graphs: Represents the influence of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Supplementary Functions
Archive: Archive and access prior balancing sessions.
Reports: Create thorough reports on balancing.
Rebalancing: Simplifies rebalancing using stored data.
Serial Production Balancing: Ideal for rotor balancing in production environments.
Included with the Device
The Balanset-1A kit includes:
A measurement block with USB interface.
Two accelerometers.
Optical laser tachometer with magnetic mount.
Digital scales.
Software (laptop not included, available for purchase).
Hard plastic carrying case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Primary Functions and Features
Vibration Meter Mode
Tachometer: Accurate RPM measurement.
Phase: Determines the vibration signal's phase angle for accurate analysis.
1x Vibration: Measurement and analysis of the main frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Saves data for later analysis.
Balancing Function
Single-Plane Balancing: Balances rotors in one plane to minimize vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Shows imbalance on a polar chart for precise weight positioning.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Computes allowable imbalance as per ISO 1940 standards.
Grinding Wheel Balancing: Utilizes three counterweights to balance grinding wheels.
Graphs and Visualizations
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Represents vibration behavior at the main frequency.
Harmonic Graphs: Represents the influence of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Supplementary Functions
Archive: Archive and access prior balancing sessions.
Reports: Create thorough reports on balancing.
Rebalancing: Simplifies rebalancing using stored data.
Serial Production Balancing: Ideal for rotor balancing in production environments.
Included with the Device
The Balanset-1A kit includes:
A measurement block with USB interface.
Two accelerometers.
Optical laser tachometer with magnetic mount.
Digital scales.
Software (laptop not included, available for purchase).
Hard plastic carrying case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro